How thoroughly clean the keyboard
The keyboard of our computer is the hardware, they often find more dust, and realize there’s perhaps because we use it very often and because we have always under the eyes.
The powder does not help much in our favor; in the cracks of the keyboard dust is the only element that privileges. Let us see and understand the whole way to thoroughly clean your keyboard.
1.) The powder in the keyboard can bring several problems consequential including: the malfunctioning of typing, a slowing down of the pressure and type. You have to periodically clean the keyboard, remove all dust, dirt and clean the Anointed. Let’s start with cleaning the dust. To clean the keyboard from dust, there are various methods, some more and some less effective; the most other craft, or rely on a product ” commercial “, let’s see them together.
2.) The method most classic and easy to perform to remove dust from the keyboard is to use a jet of air (suction or repulsive) such as the jet of a vacuum cleaner. For example, if we do not own a vacuum cleaner or if it cannot bring it closer to the keyboard, we can consider a great alternative, which is to use a hair dryer (phon), pointing between the cracks of the keyboard with an inclination of about forty-five degrees (with a jet of cold air), this will result in the escape of dust from the slots opposite (we realize that we both ended up in there for all). We can to turn the hair dryer from the opposite side (the side of the hole take air / vacuum) so as to suck the last remaining dust.
3.) The method ” commercial ” for the elimination of dust from the keyboard is to buy a silicone rubber (cyber clean) ie a rubber fairly malleable and very sticky that will capture all the dust with which will come in contact. Obviously, this procedure will not be able to clean the keyboard lunge because the dust will remain at the points where the rubber will infiltrate (which was not the case with the air jet, which is able to infiltrate any slot favoring the dust out out). Another simple method for the removal of the powder is the use of a brush of small dimensions able to a sliver in small cracks.
4.) To clean the keyboard is not enough just to remove the dust, but we must also remove traces of grease, dirt and ” wear “. It can use a little of toilet paper soaked from a drop of liquid soap, or to be sure, we can use ethyl alcohol degreasing. It cleans and dries too quickly (due to its low-temperature evaporation). Rub our strong alcohol wipe on the dirty surface. We insist the points where dirt and grease persist.
5.) Remember to never spray water chemicals directly on the keyboard because these could cause a short compromising normal use. You can wash it when it is needed, precisely when the dirt will have taken over, we can clean the keyboard (with the methods previously seen) every month or every 45 or 50 days.
